The Type 8045HT Insertion Magflowmeter features a stainless steel insertion sensor that allows it to meet the high-temperature/high-pressure requirements of various applications. This solid-state sensor, which shows flow rate and volume, accommodates charged and uncharged fluids (normal, contaminated, viscose). The Type 8045HT handles medium temperatures up to 230°F and fluid pressures up to 230 psi. Measuring velocity range is 0.33 f/s to 32.8 f/s. Minimum conductivity is >20 micro>S/cm, while maximum viscosity capability is 2000 mm2/s (cSt). Measuring error applying manual works calibration or teach-in is = ±2% o.R. (3.28-32.8 f/s); applying standard K-factor, = ±4% o.R. (3.28-32.8 f/s). Linearity is = ±(1% o.R. + 0.1% fs), while repeatability is ±0.25% o.R. The Type 8045HT is compatible with pipe diameters of 1/2- to 8-inches. Standard outputs for the Type 8045HT include pulse, relay and 4- 20mA. The menu-driven unit is operated via a three-key control pad that is part of a large, eight-character digital display; a transparent display cover ensures easy viewing of process values while offering mechanical and chemical protection. A simulation mode allows the Type 8045HT to be dry-run and adjusted before putting it into actual operation. The unit carries FDA approval./t1>B>co>Burkertrsphone>918003251405/rsphone>